Nortel Networks Modular ICS 4.0 Applying button cap labels, Enter code, Quit Clear, Feature code

118 / Customizing your telephone

Enter code:	If you are checking a speed dial button, enter
	the two-digit speed dial code that you want to
	check.

F__

QUIT CLEAR

Feature code:

QUIT

Feature moved

Press a button

EXIT

Program and HOLD

Enter the feature code, or press ®or QUIT to quit programming or CLEAR to clear the numbers you have entered. The system accepts the entry as soon as you enter a valid feature code.

Press ƒand enter the feature code you want to assign to the button. You cannot enter invalid codes.

You have programmed a button with a feature that was already programmed onto another button. The feature has moved to the button you just programmed. Its original button is now blank.

Press the button you want to check. Press ƒor EXIT when you are finished.

Enter the number you want to program and press ˙. To erase the button, just press ˙.

Program and OK		Enter the number you want to program and
QUIT	OK	press OK. To erase the button, just press
		˙or OK.

For other displays, see “Common feature displays” on page 203.

Applying button cap labels

Before you apply button labels, activate the Button Inquiry feature ( ƒ•‚) to verify the button functions, and to avoid activating features as you put the labels onto the buttons. For more information refer to “Finding out what a button does using Button Inquiry” on page 115.

Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01