Nortel Networks Modular ICS 4.0 manual Using special telephones, Clearing a Call Log password

174 / Using System features

Clearing a Call Log password

If an individual has forgotten their Call Log password, you can clear it in programming. The individual can then enter a new password from his or her telephone.

You need the programming template found at the front of this guide. See “Getting started with Norstar” on page 1 for more information.

1.Press ƒ••¤flfl‹››.

2.Press ¤‹fl›fl(the default System Coordinator password).

3.Press ‘four times.

4.Press ≠at Passwords.

5.Press ‘until the display reads Call log pswds.

6.Press ≠and enter the internal telephone number of the telephone where you want to clear the Call Log password.

7.Press ≠, then press CLR to clear the password.

Using special telephones

Direct-dial

You can reach the direct-dial telephone by dialing a single digit. The direct-dial telephone is usually in a central location, such as a attendant’s desk. You can have up to five direct-dial telephones for your Norstar system. It is usually the prime telephone or the central answering position (CAP).

The direct-dial telephone can send up to 30 messages and can invoke Services to activate the extra-dial telephone.

Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01