Nortel Networks Modular ICS 4.0 Time savers for making calls, Adding an autodial button ⁄or ƒ¤

Time savers for making calls

Storing a number on a memory button for Autodial

You can program memory buttons for one-touch dialing of internal or external telephone numbers.

Buttons used for lines, answer or Handsfree/Mute cannot be used as autodial buttons.

If the power to your Norstar system is off for more than three days, autodial numbers (as well as some other system programming) may be lost from the memory.

Adding an autodial button

ƒ•⁄or ƒ•¤

1.Press ƒ•⁄to program an external number or ƒ•¤for an internal number.

2.Choose a button and then enter the number as if you were dialing it.

When programming Autodial you can use:

•Last Number Redial

•Saved Number Redial

• destination codes (choose Δas the line)

•host system signalling

Choosing a line for Autodial

To include a line selection for an external number, press the line or intercom button before you enter the number. To select a line pool, press a programmed line pool button, or press

Δand enter a line pool access code.

P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide