Nortel Networks Modular ICS 4.0 manual Displays while canceling redirection

92 / Forwarding your calls

Displays while canceling redirection

Select line(s)

QUIT ALL

Press the lines that are no longer to be redirected. The lines light up as you press them. Once you cancel redirection for a line you cannot restore it by pressing the line again. Press ALL to cancel redirection for all your lines. When you are finished, press ˙or OK.

Select line(s)		Continue to press the lines that are no
ALL	OK	longer to be redirected. Press ˙
		or OK when you are finished.

For other displays, see “Common feature displays” on page 203.

How Line Redirection is different from Call Forward Call Forward forwards all calls that arrive at a particular telephone to another telephone within the Norstar system. Line Redirection redirects only the lines you specify, no matter which telephones they appear on, to a telephone outside the Norstar system. Line Redirection takes precedence over Call Forward.

Using Line Redirection

You redirect lines at a telephone, but once redirected, the lines are redirected for the entire system.

You can redirect only lines that appear at line buttons on your telephone.

You can answer the telephone if it rings while you are in the middle of programming Line Redirection, but none of the Norstar call handling features are available until the feature times out. If you need to use a Norstar feature to process the call, quit Line Redirection programming by pressing

ƒ. Do not press ®or you disconnect the call you are trying to process.

Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01