Nortel Networks Modular ICS 4.0 manual Removing yourself from a conference, Line001, Transfer

44 / Answering calls

2.Take the held call off hold. This is not necessary for the M7100 telephone.

Removing yourself from a conference

ƒ‡‚

You can remove yourself from a conference, and connect the other two callers through your Norstar system.

Enter the Transfer feature code ƒ‡‚.

When you remove yourself from a conference using the Transfer feature, and both callers are from outside your system, one of the callers must have called you on a disconnect supervised line, or the call is be disconnected.

Displays

3 parties only

Conf. on hold

Conference busy

You are trying to add a fourth party to your conference call, or to join two conferences together. Release one call from the conference before adding another, or keep the two conferences separate.

You have put a conference call on hold.

You have tried to make a conference call, but your system is already handling its maximum number of conference calls.

Line001 221

TRANSFER

Press held line

You are on a conference with the two lines or telephones shown. You can drop out of the conference and leave the other two parties connected (Unsupervised Conference) by pressing TRANSFER or entering the Transfer feature code.

You have activated the Conference feature with one call active and another on hold. Press the line of the call on hold to bring that person into the conference.

For other displays, see “Common feature displays” on page 203.

Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01