Nortel Networks Modular ICS 4.0 manual Press ƒ¤flfl‹››

36 / Answering calls

Making Call Display information appear automatically at a telephone

Each telephone that rings for an external line can display Call Display information for that line. After the call is answered, Call Display information is always shown at the telephone that answered the call. Your installer or customer service representative can program telephones to have automatic Call Display.

This feature is not available to ISDN terminals.

Changing which information is shown first about a call Depending on the services you subscribe to, Call Display information may contain up to three parts: the name of the caller, the number of the caller, and the name of the line in your Norstar system that the call is on. For each telephone, you can determine which information is displayed first.

You need the programming template found at the front of this guide. See “Getting started with Norstar” on page 1 for more information.

1.Press ƒ••¤flfl‹››.

2.Press ¤‹fl›fl(the default System Coordinator password).

3.Press ≠and enter the internal number of the telephone you want to program.

4.Press ≠.

5.Press ‘four times.

6.Press ≠.

7.Choose a setting at 1stDisplay: using the CHANGE button. The choices are Name, Numbr or Line.

Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01