Nortel Networks Modular ICS 4.0 manual Intercom, Line Redirection, Quit ADD Remove

90 / Forwarding your calls

6. Press CHANGE to select Y (Yes) or N (No).

Turning the redirect ring for a telephone on or off You can program a telephone to ring briefly (200 milliseconds) when a call is redirected on one of its lines.

You need the programming template found at the front of this guide. See “Getting started with Norstar” on page 1 for more information.

1.Press ƒ••¤flfl‹››.

2.Press ¤‹fl›fl(the default System Coordinator password).

3.Press ≠and enter the internal number of the telephone you want to program.

4.Press ≠twice.

5.Press “three times. The display reads

Redirect ring:.

6.Press CHANGE to select Y (Yes) or N (No).

Tip - If a telephone has redirect ring enabled, it rings briefly for redirected calls on one of its lines even if another telephone set up the line redirection.

Displays while redirecting lines

Intercom	You selected the intercom button as the
	facility to place the call on. Enter a line pool
	code or a destination code.
	Press •or ADD to begin redirection. Press
Line Redirection
QUIT ADD REMOVE	£or REMOVE to cancel a previous
	redirection.

Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01