Alliance Laundry Systems P232156R9 manual Operation, UW Models With UniLinc Control

Basic Installation/Operation

Operation

UW Models With UniLinc Control

1.When display shows the Cycle Menu Screen washer-extractor is ready to be loaded with laundry.

2.On UW35-UW150 models. Press the door unlock button located on the lower left front on the control. Refer to Figure 8.

3.Open door within five seconds of pressing the door unlock keypad.

UW35 – UW150 MODELS

PHM705N

Figure 8

4.On 35 – 125 models, turn door handle clockwise and swing the door left to open. Door must be opened within 5 seconds of pressing the door unlock button. Refer to Figure 9.

UW35 – UW125 MODELS

MD004J

Figure 9

5.On 150 models, turn handle counterclockwise and swing the door right to open. Door must be opened within 5 seconds of pressing the door

unlock button. Refer to Figure 10.

150 MODELS

PHM717N

Figure 10

6.Load the washer-extractor to full capacity whenever possible, but do not exceed the rated dry-weight capacity of the machine if the fabric to be washed is quite dense, closely woven, and heavily soiled.

Overloading can result in an inferior wash. The operator may need to experiment to determine load size based on fabric content, soil content, and level of cleanliness required. Do not underload the machine. Underloading can result in premature bearing and sealing failure and out- of-balance situations.

PHM590N

Figure 11

F232156 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 29