6.Add dry supplies to the supply dispenser compartment cups prior to the start of each cycle.
Liquid supplies can be injected directly into the supply dispenser by an external chemical supply system.
NOTE: Supply dispenser compartment cups must not be removed when an external chemical injection supply system is attached to the washer- extractor.
7.Press the Up or Down keypad until the desired cycle number is displayed. Press the Start keypad to start the cycle.
To display the temperature of the water while cycle is running, press the Up keypad. To display the number of the cycle in progress, press the Start keypad.
Basic Installation/Operation
NOTE: Press keypads at their centers just hard enough to activate them.
8. Cycle is complete when display reads “donE”.
NOTE: A cycle can be stopped at any time by pressing the Stop keypad.
F232156 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 35 |
