Alliance Laundry Systems T433I Airflow Light, Manual Timer Models Only

Adjustments

Airflow LightManual Timer Models Only

The light on the front control indicates when the airflow through the tumbler is less than normal. When this light flickers on and off or stays on all the time, the tumbler cannot operate properly.

If cleaning the lint screen does not correct the problem, other possibilities include: Lint build-up in the exhaust line or discharge vent, incorrect rotation of blower, lack of make-up air, jammed backdraft damper, overloaded tumbler or anything else that will reduce the airflow.

1

2

3

4

5

6

FOR 120 POUND TUMBLERS ONLY

T173I

1Airflow Switch (Non-EU)

2Airflow Switch (EU)

3Final Drive Eyebolt

4Reversing Motor 3/4 Horsepower

5Drive Motor Eyebolt

6Blower Motor 1 Horsepower

Figure 21

The airflow light is wired to the normally close contact of the airflow switch, so when the airflow switch flutters or does not pull in, the light will advise the operator that there is a problem, which should be corrected immediately. It is normal for the light to come on for two seconds when the tumbler is started. It should go out when the blower is up to speed.

1

2

3

4

5

T283i

FOR 170 POUND TUMBLERS ONLY

T283I

1Airflow Switch

2Final Drive Eyebolt

3Reversing Motor 3/4 Horsepower

4Drive Motor Eyebolt

5Blower Motor 3 Horsepower

Figure 22

50 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT M414038