Specifications and Dimensions

Machine Dimensions

Dimensional Clearances

Allow a minimum of 24 inches (60 cm) at the rear and 18 inches (45 cm) at the sides for maintenance, inspection, and adjustment. Allow at least 18 inches (45 cm) between machines in multiple installations. Machine dimensions are indicated in Figure 3, Figure 4 and Table 1.

NOTE: The dimensions shown here are for planning purposes only. They are approximate and subject to normal manufacturing tolerances. If

exact dimensions are required for construction purposes, contact the distributor or the manufacturer. We reserve the right to make changes at any time without notice.

WARNING

Crush hazard.

To avoid personal injury and/or property damage, do not tip the UW150 machine more than 25 degrees in any direction.

W642

UWPV Pocket Hardmount Machine Dimensions (Refer to Figure 3 and Figure 4)
Dimension

 

35

 

60

80

 

100

 

125

 

 

150

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

in

 

mm

in

 

mm

in

mm

in

 

mm

in

 

mm

in

 

mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A

30.12

 

765

35.63

 

905

41.12

1045

41.12

 

1045

48

 

1219

50.25

 

1277

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B1

33.39

 

847

36.63

 

930

41.5

1054

41.5

 

1054

48

 

1219

50.25

 

1277

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

23.75

 

603

28.25

 

718

29

737

29

 

737

29

 

737

32

 

813

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D

43.63

 

1108

45

 

1143

51-1/2

1308

54.5

 

1384

58

 

1473

63

 

1600

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

E2

1/2

 

13

1

 

25

3

76

3

 

76

1.5

 

38

2.9

 

73

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F

55.5

 

1410

64.5

 

1638

68-1/2

1740

68.5

 

1740

72

 

1829

79

 

2007

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

G2

36

 

914

36

 

914

43-3/4

1111

43-3/4

 

1111

48

 

1219

56

 

1422

H

8

 

203

15.52

 

394

16-7/8

429

16-7/8

 

429

11-3/8

 

289

15.75

 

400

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

J

43.88

 

1114

55

 

1397

58-1/2

1486

58-1/2

 

1486

63-3/8

 

1610

70

 

1778

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1Overhang dimensions for the optional starch dispenser are as follows: UW35PV, 3.88 inches (9.86 cm); UW60PV, 1.75 inches (4.45 cm);

UW80PV and UW100PV, 0.33 inch (0.83 cm). (The starch dispenser does not overhang the UW125PV.) (No longer available.)

2The overhang dimension for the premium wet clean module option (compatible with wet-clean-capable washer-extractors only) adds 24 inches (60.96 cm) to combined machine dimensions E and G.

Table 1

F232084

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

11