Introduction

Model Identification

Information in this manual is applicable to these models:

UW35PVUW60PV

UW80PVUW100PV

UW125PVUW150PV

This manual is designed as a guide to the installation of the Pocket Hardmount washer-extractor equipped with the AC inverter drive.

NOTE: All information, illustrations, and specifications contained in this manual are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice.

Delivery Inspection

Upon delivery, visually inspect crate, protective cover, and unit for any visible shipping damage. If the crate, protective cover, or unit is damaged or signs of possible damage are evident, have the carrier note the condition on the shipping papers before the shipping receipt is signed, or advise the carrier of the condition as soon as it is discovered.

Remove the crate and protective cover as soon after delivery as possible. If any damage is discovered upon removal of the crate and/or protective cover, advise the carrier and file a written claim immediately.

Nameplate Location

The nameplate is located on cagewrap, on side of AC Inverter Drive Compartment and on Electric Heat Contractor Box (if equipped). Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance. Refer to Figure 1.

MODEL EXAMPLE OF NAMEPLATE LOCATION

3

1

2

P

U

S

H

PHM618N

1Near Supply Valves on Cagewrap

2Below Inverter Exhaust Fan on Electric Heat Box (if equipped)

3Side of AC Drive Compartment-

Figure 1

Replacement Parts

If literature or replacement parts are required, contact the source from which the washer-extractor was purchased or contact Alliance Laundry Systems LLC at (920) 748-3950 for the name of the nearest authorized parts distributor. A parts manual may be ordered by returning the reply card provided with each washer-extractor.

Customer Service

For technical assistance, contact your local distributor or call:

(920)748-3121 Ripon, Wisconsin

A record of each washer-extractor is on file with the manufacturer. Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance. Refer to Figure 1 and Figure 2.

6

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

F232084