Alliance Laundry Systems UW150PV, UW35PV Mounting Bolt Hole Locations

1 43

Specifications and Dimensions

28.63 in.

(727 mm)

36 in. (914 mm)

43.28 in.

(1089 mm)

40.19 in.

(1022 mm)

34.5 in. (876 mm)

0.75in. (19 mm)

30.19 in. (767 mm)

21.19 in. (538 mm)

2 in.

34.16 in.

(868 mm)

26.12 in.

(664 mm)

2 in.

(51 mm)

30.12 in.

(765 mm)

UW35PV

FRONT OF MACHINE

Figure 8

(51 mm)

PHM630N

F232084

Contents

Keep These Instructions for Future Reference www.comlaundry.com Page Table of Contents Safety Information Explanation of Safety Messages Important Safety Instructions Page Safety Decals Operator Safety Introduction Model Identification Delivery Inspection Nameplate Location Replacement Parts Introduction Model Number Familiarization Guide UW60PVQU80001 Specifications and Dimensions Specifications and Dimensions UWPV Models (Continued) Cylinder Speeds / Centrifugal Force Data Balance Detection Direct Steam Heating (Optional) Electrical Heating (Optional) Machine Dimensions Crush hazard Page Page Machine Foundation Requirements Concrete Foundation Pad Installation Page Floor Load Data Mounting Bolt Installation Requirements (Approved Foundations Only) Machine Mounting and Grouting Mounting Bolt Hole Locations Page Page Page Page Grout Placement Drain Connection Requirements For UW125PV and UW150PV Models Only UWPV Pocket Hardmount Drain Information Model Number of Machines Water Connection Page Electrical Installation Requirements IMPORTANT: Do NOT use fuses in place of a circuit breaker Do not use a phase adder on any variable- speed machine Electrical Specifications Voltage Designation Standard Electric Heat Code Steam Requirements (Steam Heat Option Only) Chemical Injection Supply System Page Page SUPPLY LINE Designs Page Premium Wet Clean Module