Allied Telesis 86241-06 manual Availability

30 Patch Release Note

Figure 1-7: Example output from the SHOW SWITCH PORT command showing the RELEARN parameter.

Switch Port Information

---------------------------------------------------------------------------

Port	1
Description		To intranet hub, port 4
Status		ENABLED
Link State		Up
UpTime		00:10:49
Port Media Type		ISO8802-3 CSMACD
Configured speed/duplex		Autonegotiate
Actual speed/duplex		1000 Mbps, full duplex
Configured master/slave mode ..		Autonegotiate
Actual master/slave mode		Master
Acceptable Frame Types		Admit All Frames
Broadcast rate limit		1000/s
Multicast rate limit		-
DLF rate limit		-
Learn limit		-
Relearn		OFF
Intrusion action		Discard
Current learned, lock state ...		15, not locked
Mirroring		Tx, to port 22
Is this port mirror port		No
Enabled flow control		Pause
Send tagged pkts for VLAN(s) .. marketing (87)
		sales (321)
Port-based VLAN		accounting (42)
Ingress Filtering		OFF
Trunk Group		-
STP		company
Multicast filtering mode		(B) Forward all unregister groups

---------------------------------------------------------------------------

Table 1-1: New parameter in the output of the SHOW SWITCH PORT command.

Parameter	Meaning
Relearn	Whether or not MAC address learning is used, one of “ON or
	OFF”.

Availability

Patches can be downloaded from the Software Updates area of the Allied Telesyn web site at www.alliedtelesyn.co.nz/support/updates/patches.html. A licence or password is not required to use a patch.

Patch 86241-05 for Software Release 2.4.1 C613-10340-00 REV E