Patch 86241-06 For Rapier Switches

3

PCR: 03056

Module: SSH

Level: 3

During an SSH session between the switch and the Secure CRT client, the client did not receive a reply to its MAX-packet-size CMSG. The switch does not support this message, but will now send a negative response to satisfy the secure CRT client’s requirements.

PCR: 03064 Module: SNMP

Level: 4

The MIB objects ifTestTable and ifRcvAddressTable were incorrectly included in the switch’s SNMP implementation. These have been removed.

PCR: 03065

Module: SWI

Level: 2

When the TX cable was unplugged from a fibre port the operating status was incorrectly reported as UP. This issue has been resolved.

PCR: 03070

Module: BGP

Level: 2

When BGP imported other route types, it would advertise routes that had nexthops of the BGP peers themselves. The BGP peers would reject these routes and close the peering session, thus preventing the exchange of routing information between BGP peers. This issue has been resolved.

PCR: 03072

Module: BGP

Level: 4

The Import parameter of the ADD, SET, DELETE and SHOW BGP commands now has an INTERFACE type. INTERFACE routes were previously grouped with STATIC routes.

PCR: 03073

Module: UTILITY

Level: 2

If the CREATE QOS POLICY command was executed with a range that had a number more than four characters long, for example, CREATE QOS POLICY=123-12345, then a switch restart occured. An error message is now displayed if more than four numbers are entered for a range.

PCR: 03074

Module: USER

Level:

The SET USER command now requires the PASSWORD option if a PRIVILEGE is specified. This enables privilege levels to be lowered from a higher level (MANAGER, or SECURITY OFFICER), to USER.

PCR: 03081

Module: SWI

Level:

An untagged packet would occasionally be sent on a tagged port. This issue has been resolved.

PCR: 03082

Module: SWI

Level:

When PIM was enabled, IGMP snooping would occasionally work incorrectly. This issue has been resolved.

PCR: 03087

Module: IPG

Level:

When interfaces with IGMP proxies were deleted, a software restart could sometimes occur. This issue has been resolved.

Patch 86241-05 for Software Release 2.4.1 C613-10340-00 REV E

Page 3
Image 3
Allied Telesis 86241-06 PCR Module SSH Level, PCR 03064 Module Snmp Level, PCR Module SWI Level, PCR Module Utility Level