4Patch Release Note
PCR: 03100 Module: DHCP | Level: |
DHCP was assigning incorrect IP addresses to clients when they moved from a relayed to a
PCR: 03101 | Module: IPG | Level: 2 |
Deriving the originating VLAN from incoming packets could, in some circumstances, cause a software restart. This issue has been resolved.
PCR: 03102 | Module: IPG | Level: 3 |
The PING command when executed with the LENGTH and PATTERN parameters could produce an ICMP echo packet with an incorrect ICMP checksum. This issue has been resolved.
PCR: 03104 | Module: IPG | Level: 3 |
When an IP packet with an invalid TOTAL LENGTH field was received by the CPU routing process, subsequent valid packets were dropped. This issue has been resolved.
PCR: 03107 | Module: FR, PPP | Level: 2 |
The mechanism for freeing discarded packets in Frame Relay and PPP could, in some circumstances, cause a software restart. This issue has been resolved.
PCR: 03108 Module: MLDS | Level: 4 |
The DISABLE MLDS command appeared twice in configuration files. This issue has been resolved.
PCR: 03110 | Module: IPG | Level: 2 |
The ADD IP MVR command could cause a software restart. This issue has been resolved.
The ADD IP MVR command parameter GROUP now only accepts multicast addresses.
PCR: 03113 Module: DVMRP | Level: 2 |
With DVMRP configured, the switch did not forward multicast data to downstream interfaces on the same VLAN. This issue has been resolved.
PCR: 03114 Module: DHCP | Level: 3 |
DHCP clients that shifted between relayed ranges were not always recognised, and were occasionally allocated incorrect addresses. This issue has been resolved.
PCR: 03121 Module: DVMRP | Level: 2 |
Invalid DVMRP prune messages could cause a software restart. This issue has been resolved.
PCR: 03122 | Module: SWI | Level: 2 |
Adding a static ARP entry to a trunk group could cause a software restart.
This issue has been resolved.
Patch