Allied Telesis 86241-06 manual PCR 02315 Module Snmp Network affecting No

6 Patch Release Note

Features in 86241-05

Patch file details are listed in Table 2:

Table 2: Patch file details for Patch 86241-05.

Base Software Release File	86s-241.rez
Patch Release Date	17-Jan-2003
Compressed Patch File Name	86241-05.paz
Compressed Patch File Size	332388 bytes

Patch 86241-05 includes all issues resolved and enhancements released in previous patches for Software Release 2.4.1, and the following enhancements:

PCR: 02315 Module: SNMP Network affecting: No

Support has been added for SNMPv2c.

SNMP responses will be sent in the same version format as the request message. Minimal configuration is required to specify a SNMP format, because this is decided on a message by message basis. The only thing you need to specify is the version of SNMP received by trap hosts.

To create an SNMP community, use the command:

CREATE SNMP COMMUNITY=name [ACCESS={READWRITE}] [TRAPHOST=ipadd] [MANAGER=ipadd] [OPEN={ONOFFYESNOTRUEFALSE}] [V1TRAPHOST=ipadd]

[V2CTRAPHOST=ipadd]

To add a trap host or management station to the previously created SNMP community, use the command:

ADD SNMP COMMUNITY=name [TRAPHOST=ipadd] [MANAGER=ipadd]

[V1TRAPHOST=ipadd] [V2CTRAPHOST=ipadd]

PCR: 02389 Module: DS3 Network affecting: No

DS3 interface and board type support has been added. DS3 is now supported over PPP and Frame Relay. DS3 MIB support has been added.

For more information on DS3, see “DS3 Interfaces” on page 22 of this release note.

PCR: 02414 Module: IPv6, SWI, IPG, VLAN Network affecting: No

This patch resolves issues that arose after previous modifications made under this PCR number.

Sometimes IPv6 features did not enable correctly. Also, there were some errors in the output from configuration commands. These issues have been resolved.

PCR: 02560 Module: IPG, SWI, VLAN Network affecting: No

IP packet throughput has been improved.

Patch 86241-05 for Software Release 2.4.1 C613-10340-00 REV E