Allied Telesis AT-2931SX manual Modifying a Team

Advanced Control Suite for the AT-2931SX Adapter User’s Guide

Note

The maximum number of members in a team is 8.

Note

When team configuration has been correctly performed, a Virtual Team adapter driver is created for each configured team.

Note

If you disable a virtual team and later want to reenable it, you must first disable and reenable all team members before you reenable the virtual team.

Note

When you create Generic Trunking and Link Aggregation teams, you cannot designate a Standby Member. Standby members work only with Smart Load Balance and Failover and SLB (Auto-Fallback Disable) types of teams.

Note

For an SLB (Auto-Fallback Disable) team, when you want to restore traffic to the load balance members from the standby member, click the Fallback button on the Team Properties Tab.

Note

Not all network devices made by other vendors are supported or fully certified for teaming.

8.Configure the Team IP address if necessary.

If other network devices in your computer use TCP/IP bindings, the TCP/IP Properties windows is displayed.

9.Configure the IP address and any other necessary TCP/IP configuration for the team and click OK when finished.

Modifying a Team

After you have created a team, you can modify the team in the following ways:

ˆChange the type of team

ˆChange the members assigned to the team

39