Allied Telesis AT-2931SX manual Rpm -i basplnx-version.src.arch.rpm

Advanced Control Suite for the AT-2931SX Adapter User’s Guide

Installing the BASP Source RPM Package for Red Hat and United Linux

To install the AT-2931SX BASP RPM source package for Red Hat and

United Linux 1.x based distributions, perform the following procedure.

1.To install the RPM source package, run

%rpm -i basplnx-{version}.src.{arch}.rpm

2.Change directory to the RPM path and build the binary driver for the kernel (use rpmbuild for Red Hat 8.0 or later)

%cd /usr/src/{redhat or packages}

%rpm -bb SPECS/basplnx.spec or rpmbuild -bb SPECS/ basplnx.spec

Note

Each Linux distribution has a unique RPM path.

3. Install the newly built package

% rpm -i RPMS/i386/basplnx-{version}.{arch}.rpm

The driver and other required files are installed automatically.

4.To load the driver

% insmod basp

5.To set up the teams, refer to “AT-2931SX BASP Configuration for Red Hat and United Linux Distributions” on page 54.

51