Allied Telesis AT-2931SX manual Etc/init.d/basp start

Advanced Control Suite for the AT-2931SX Adapter User’s Guide

The AT-2931SX BASP configuration process, perform the following procedure:

1.Copy a configuration script from the "/etc/basp/samples" directory to the "/etc/basp" directory.

Note

The configuration script name must be prefixed with "team-".

2.Modify the following parameters of the configuration script:

(a)change the team type

(b)add or delete the physical network interfaces

(c)add or delete the virtual network interfaces

(d)assign IP address to each virtual network interface.

The syntax of the configuration script can be found in “AT-2931SX BASP Configuration Scripts for Red Hat Distributions” on page 58 or in the /etc/basp/sample/team-sample script file itself. Note that when configuring Teaming, at least one Primary Adapter is required.

3.Manually start the team for the first time:

%/etc/init.d/basp start

Note

This step is only required for the first time installation. The team configuration is started automatically on subsequent reboots.

Note

If not all of the virtual network interfaces are configured with an IP address, an error message is displayed when starting the AT- 2931SX BASP team. If this happens, repeat step 2 to configure an IP address for all of the virtual network interfaces.

Note

Forming multiple teams is possible by copying the sample files into "/ etc/basp/team-<name>" and modifying this file as described in the sample file.

Note

To create more that one virtual interface (VLAN) for each team, refer to the respective description section in the sample files.

55