Allied Telesis AT-8500 Series manual Indicates that the port is operating at 10 or

AT-8500 Series Layer 2+ Fast Ethernet Switches Installation Guide

Table 5. LEDs for Ports 49R and 50R on the AT-8550GB and AT-8550SP

Switches (Continued)

LED	State	Description
Mode - SPD	OFF	Indicates that the port is operating at 10 or
		100 Mbps.
	Green	Indicates that the port is operating at 1000
		Mbps.
Mode - FDX	OFF	Indicates that the port is operating in half-
		duplex mode.
	Green	Indicates that the port is operating in full-
		duplex mode.
Mode - ACT	OFF	Indicates that there is no activity on the port.
	Flashing	Indicates that the port is transmitting and/or
	Green	receiving data packets.

Table 6 describes the LEDs for the 10/100Base-TX twisted pair ports on the AT-8524POE switch.

Table 6. LEDs for the 10/100Base-TX Twisted Pair Ports on the

AT-8524POE Switch

LED	State	Description
L/A	OFF	Indicates that the port has not established a
		link with its end node.
	Steady	Indicates the port has established a valid
	Green	100 Mbps link with its end node.
	Flashing	Indicates the port is receiving or transmitting
	Green	packets at 100 Mbps.
	Steady	Indicates the port has established a valid 10
	Amber	Mbps link with its end node.
	Flashing	Indicates the port is receiving or transmitting
	Amber	packets at 10 Mbps.

33