Chapter 2: Installation
Unpacking the Switch
To unpack the switch, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the original shipping material if you need to return the unit to Allied Telesis.
2.Place the switch on a level, secure surface.
3.Make sure the following hardware components are included in your switch package. If any item is missing or damaged, contact your Allied Telesis sales representative for assistance.
One
Two mounting brackets
Eight flathead Phillips screws (All models except the
Twelve flathead Phillips screws
AC power cord (AC switches only; Americas, EC, Australia, and UK only)
Management cable for local management
Documentation CD
Warranty card
54
