Chapter 2: Installation
Installing an Optional SFP Transceiver
To install an optional SFP transceiver in an
Note
An SFP transceiver can be
1.Unpack the SFP transceiver from its shipping container and store the packaging material in a safe location.
Note
You must use the original shipping material if you need to return the module to Allied Telesis.
Warning
An SFP transceiver can be damaged by static electricity. Be sure to observe all standard electrostatic discharge (ESD) precautions, such as wearing an antistatic wrist strap, to avoid damaging the module.
2.Check that the SFP transceiver includes the items listed below. If any item is missing or damaged, contact your Allied Telesis sales representative for assistance.
One SFP module
Installation Guide
Warranty card
Note
For fiber optic cabling specifications, refer to the SFP installation guide provided with the module.
3.Follow these guidelines to ensure proper performance of your SFP transceiver:
SFP transceivers are static sensitive. To prevent Electrostatic Discharge (ESD) damage, follow your normal board and component handling procedures.
SFP transceivers are dust sensitive. Do not remove the dust cover from the port until you are ready to attach the fiber optic cable.
The most common source of contaminants in the optical bore is
62
