Chapter 2: Installation
Parity: None
Stop bits: 1
Flow control: None
Note
The port settings are for a DEC VT100 or ANSI terminal, or an equivalent terminal emulator program.
Note
When you reset or power cycle the switch during a local management session, you will see the following prompt: Press <CTRL>B to go to Boot Prompt. This message is intended for manufacturing purposes only. If you inadvertently display the boot prompt (=>), type boot and press Return to start the switch.
4.Press Return.
You are prompted for a user name and password.
5.To view and configure all of the switch’s operating parameters, enter the login name “manager”. The default password for manager access is “friend”. To only view the parameter settings, enter the login name “operator”. The default password for operator access is “operator”. The user names and passwords are
The Main Menu is displayed.
If you logged in with manager access, you can now fully manage the switch using the management interface. For instructions, refer to the
74
