User Manual
Wireless108M BroadbandRouter
CG-WLBARGS
Page
Contents
2. Hardware Installation
3. PC Setting
5. Wireless Security Configuration
Wireless setting/802.11g/b security setting
Security setting/Connection control
Advanced setting/virtual server
Avanced setting/UPnP setting/UPnP port
1.1 Package Contents
1.2 Features
1 Product Introduction
1.3 Hardware Introduction
Front Back
2.1 WLBARGS should be connecting to PC and modem
2 Hardware Installation
2.2 Installation Procedure
3.1 TCP/IP Configuration
3.1.1 Windows XP O/S
WLBARGS Manual
3.1.2 Windows 2000 O/S
6 Go back to Internet Protocol TCP/IP and press OK
7 Press OK to close Local Area Connection Properties
WLBARGS Manual
3 Click Internet protocol TCP/IP and click Properties
2 Right click Local Area Connection, and select Properties
WLBARGS Manual
WLBARGS Manual
3.1.3 Windows 98/95/ME O/S
1 Enter Control Panel, and double click Network
2 Click Configuration tab, and select TCP/IP, click Properties
WLBARGS Manual
3.1.4 Mac OS 8.x~9.x O/S
3.1.5 Mac OS X O/S
3.2 Browser Configuration
3.2.1 Windows O/S
3.2.2 Mac O/S
3 Unselect all three options in the Local Area Network LAN Setting
4 Press OK in the Internet Options
3 Do not select Web Proxy, press OK
4.1 Quick Network Configuration
4 Network Configuration
5 Please select your region. e.g. Singapore. Click on Save
7 When seeing this screen shot, click on Next
WLBARGS Manual
4.1.1 Auto obtain IP DHCP
3 Click on Save to perform connection tests
WLBARGS Manual
4.1.2 Fixed IP
3 Click on Save to perform connection tests
WLBARGS Manual
4.1.3 Dynamic IP PPPoE
3 Click on Save to perform connection tests
WLBARGS Manual
4.2 Establishing Wireless Internet Connection
Windows XP SP1 O/S
Windows XP SP2 O/S
3 Connection status will appear in the bottom right of the screen
WLBARGS Manual
5 Wireless Security Configuration
5.1 WEP Setting
WPA-PSK
5.2 WPA Setting
WPA-EAP
6.1 Features
WAN setting internet
WLBARGSFunctionManual Introduction
Mode
A. For auto obtain IP DHCP
B. For PPPoE
C. For fixed IP
Maximum Transmission Unit. when Auto Reconnect is
disable, MTU can be edited. Default setting 1454 Byte
When Manual Connection is enable, two DNS server ad
WAN setting/ Dynamic DNS
Maximum Transmission Unit. Deafault setting
server addresses can be inserted DNS1 and DNS2
cess
WAN setting/Other setting
LAN setting/LAN IP
change this address.Default setting
VPN pass through
LAN setting /DHCP server
LAN setting/PC database
1 Select Enable to enable DHCP server function. Default is enable
3 Then click on save button to save the setting
Wireless setting/802.11g/b setting
Wireless setting/802.11g/b security setting
Wireless setting/Access control
Security setting
Security setting/Connection control
Configure wireless communication between clients
Security setting/filter list
Advanced setting/virtual server
Advanced setting/DMZ
Advanced setting/UPnP setting
Avanced setting/UPnP setting/UPnP port Management
Enable
2. The PC with DMZ function needs a fixed IP address
Firmware update
PING testing
Remote control
Cable testing
Status
Status/Log Display/Dos Attack log
Status/Log Display/DHCP log
Connection status log is displayed in the table
Status/Log Display/system log
6.2 Additional Functions
Status/Log Display/E-mail function
Advanced Setting/Backup DNS
Advanced Setting/Routing/Static Routing
Advanced Setting/ Routing/ Dynamic Routing RIP
Advanced Setting/ Routing/Routing Table
WLBARGSAP/RouterManualSwitching
Warrning
8 FAQ
Please make sure if the below processes are complete or not
Windows XP
Use hardware
Windows Me/ 98
Use software
WLBARGS9 ManualSpecifications
WLBARGSAboutManual corega
Federal Communication Commission Interference Statement
IMPORTANT NOTE FCC Radiation Exposure Statement
memo
memo
Page
corega Taiwan Inc
7F., No. 10, Lane 345, YangGuang St. Nei-Hu
Chiu, Taipei City 114, Taiwan R.O.C
TEL +886-2-8751-9164 FAX +886-2-8751-9174