Allied Telesis CG-WLBARGS manual Wireless setting/802.11g/b setting

WLBARGS Manual

(1)Enter the pc name and select network connection type.

(2)Configure the mac address data.

(3)Click [Add PC Data] to complete the setting.

<Wireless setting/802.11g/b setting>

ESSID	Default ESSID is [corega].
Mode	. 802.11b/g: auto connect in either 802.11b or 802.11g.
	. 802.11g: connect in 802.11g (54Mbps) mode.
Channel	When there is interruption, other channels can be
	selected.
SuperG mode	If your Wireless LAN Card supports Super G Mode
	transmit rate.You can use this function to increase
	wireless throughput.
eXtended	When it's enabled, it can extend the transmition
Range(XR)	range, however, it may also decrease the datarate.
Transfer rate	Select date rate. Default is [Auto setting].
Hidden AP	when it's enabled, ESSID will not be seen in the
	network.
Transmit power	It is for adjusting the transmit power.

<Wireless setting/802.11g/b security setting>

This section contains WEP,WAP-PSK, WPA2-PSK, WPA-EAP and WPA2-EAP encryption setting, please refer to Chapter 5 to get detail information.

36