Wireless108M BroadbandRouter
User Manual
CG-WLBARGS
Page
2. Hardware Installation
Contents
3. PC Setting
5. Wireless Security Configuration
Security setting/Connection control
Wireless setting/802.11g/b security setting
Advanced setting/virtual server
Avanced setting/UPnP setting/UPnP port
1.2 Features
1.1 Package Contents
1 Product Introduction
Front Back
1.3 Hardware Introduction
2 Hardware Installation
2.1 WLBARGS should be connecting to PC and modem
2.2 Installation Procedure
3.1.1 Windows XP O/S
3.1 TCP/IP Configuration
WLBARGS Manual
6 Go back to Internet Protocol TCP/IP and press OK
3.1.2 Windows 2000 O/S
7 Press OK to close Local Area Connection Properties
WLBARGS Manual
2 Right click Local Area Connection, and select Properties
3 Click Internet protocol TCP/IP and click Properties
WLBARGS Manual
WLBARGS Manual
1 Enter Control Panel, and double click Network
3.1.3 Windows 98/95/ME O/S
2 Click Configuration tab, and select TCP/IP, click Properties
WLBARGS Manual
3.1.5 Mac OS X O/S
3.1.4 Mac OS 8.x~9.x O/S
3.2.1 Windows O/S
3.2 Browser Configuration
3 Unselect all three options in the Local Area Network LAN Setting
3.2.2 Mac O/S
4 Press OK in the Internet Options
3 Do not select Web Proxy, press OK
4 Network Configuration
4.1 Quick Network Configuration
7 When seeing this screen shot, click on Next
5 Please select your region. e.g. Singapore. Click on Save
WLBARGS Manual
4.1.1 Auto obtain IP DHCP
WLBARGS Manual
3 Click on Save to perform connection tests
4.1.2 Fixed IP
WLBARGS Manual
3 Click on Save to perform connection tests
4.1.3 Dynamic IP PPPoE
WLBARGS Manual
3 Click on Save to perform connection tests
4.2 Establishing Wireless Internet Connection
Windows XP SP1 O/S
Windows XP SP2 O/S
WLBARGS Manual
3 Connection status will appear in the bottom right of the screen
5.1 WEP Setting
5 Wireless Security Configuration
5.2 WPA Setting
WPA-PSK
WPA-EAP
WAN setting internet
6.1 Features
WLBARGSFunctionManual Introduction
Mode
B. For PPPoE
A. For auto obtain IP DHCP
Maximum Transmission Unit. when Auto Reconnect is
C. For fixed IP
disable, MTU can be edited. Default setting 1454 Byte
When Manual Connection is enable, two DNS server ad
Maximum Transmission Unit. Deafault setting
WAN setting/ Dynamic DNS
server addresses can be inserted DNS1 and DNS2
cess
LAN setting/LAN IP
WAN setting/Other setting
change this address.Default setting
VPN pass through
LAN setting/PC database
LAN setting /DHCP server
1 Select Enable to enable DHCP server function. Default is enable
3 Then click on save button to save the setting
Wireless setting/802.11g/b security setting
Wireless setting/802.11g/b setting
Security setting
Wireless setting/Access control
Security setting/Connection control
Configure wireless communication between clients
Security setting/filter list
Advanced setting/DMZ
Advanced setting/virtual server
Avanced setting/UPnP setting/UPnP port Management
Advanced setting/UPnP setting
Enable
2. The PC with DMZ function needs a fixed IP address
Firmware update
Remote control
PING testing
Cable testing
Status/Log Display/Dos Attack log
Status
Status/Log Display/DHCP log
Connection status log is displayed in the table
6.2 Additional Functions
Status/Log Display/system log
Status/Log Display/E-mail function
Advanced Setting/Routing/Static Routing
Advanced Setting/Backup DNS
Advanced Setting/ Routing/ Dynamic Routing RIP
Advanced Setting/ Routing/Routing Table
Warrning
WLBARGSAP/RouterManualSwitching
Please make sure if the below processes are complete or not
8 FAQ
Windows XP
Windows Me/ 98
Use hardware
Use software
WLBARGS9 ManualSpecifications
WLBARGSAboutManual corega
IMPORTANT NOTE FCC Radiation Exposure Statement
Federal Communication Commission Interference Statement
memo
memo
Page
7F., No. 10, Lane 345, YangGuang St. Nei-Hu
corega Taiwan Inc
Chiu, Taipei City 114, Taiwan R.O.C
TEL +886-2-8751-9164 FAX +886-2-8751-9174