User Manual
Wireless108M BroadbandRouter
CG-WLBARGS
Page
5. Wireless Security Configuration
Contents
2. Hardware Installation
3. PC Setting
Avanced setting/UPnP setting/UPnP port
Wireless setting/802.11g/b security setting
Security setting/Connection control
Advanced setting/virtual server
1.1 Package Contents
1.2 Features
1 Product Introduction
Front Back
1.3 Hardware Introduction
2.1 WLBARGS should be connecting to PC and modem
2 Hardware Installation
2.2 Installation Procedure
3.1.1 Windows XP O/S
3.1 TCP/IP Configuration
WLBARGS Manual
WLBARGS Manual
3.1.2 Windows 2000 O/S
6 Go back to Internet Protocol TCP/IP and press OK
7 Press OK to close Local Area Connection Properties
3 Click Internet protocol TCP/IP and click Properties
2 Right click Local Area Connection, and select Properties
WLBARGS Manual
WLBARGS Manual
WLBARGS Manual
3.1.3 Windows 98/95/ME O/S
1 Enter Control Panel, and double click Network
2 Click Configuration tab, and select TCP/IP, click Properties
3.1.5 Mac OS X O/S
3.1.4 Mac OS 8.x~9.x O/S
3.2.1 Windows O/S
3.2 Browser Configuration
3 Do not select Web Proxy, press OK
3.2.2 Mac O/S
3 Unselect all three options in the Local Area Network LAN Setting
4 Press OK in the Internet Options
4 Network Configuration
4.1 Quick Network Configuration
5 Please select your region. e.g. Singapore. Click on Save
7 When seeing this screen shot, click on Next
WLBARGS Manual
4.1.1 Auto obtain IP DHCP
WLBARGS Manual
3 Click on Save to perform connection tests
4.1.2 Fixed IP
WLBARGS Manual
3 Click on Save to perform connection tests
4.1.3 Dynamic IP PPPoE
WLBARGS Manual
3 Click on Save to perform connection tests
4.2 Establishing Wireless Internet Connection
Windows XP SP1 O/S
Windows XP SP2 O/S
WLBARGS Manual
3 Connection status will appear in the bottom right of the screen
5.1 WEP Setting
5 Wireless Security Configuration
5.2 WPA Setting
WPA-PSK
WPA-EAP
Mode
6.1 Features
WAN setting internet
WLBARGSFunctionManual Introduction
B. For PPPoE
A. For auto obtain IP DHCP
When Manual Connection is enable, two DNS server ad
C. For fixed IP
Maximum Transmission Unit. when Auto Reconnect is
disable, MTU can be edited. Default setting 1454 Byte
cess
WAN setting/ Dynamic DNS
Maximum Transmission Unit. Deafault setting
server addresses can be inserted DNS1 and DNS2
VPN pass through
WAN setting/Other setting
LAN setting/LAN IP
change this address.Default setting
3 Then click on save button to save the setting
LAN setting /DHCP server
LAN setting/PC database
1 Select Enable to enable DHCP server function. Default is enable
Wireless setting/802.11g/b security setting
Wireless setting/802.11g/b setting
Configure wireless communication between clients
Wireless setting/Access control
Security setting
Security setting/Connection control
Security setting/filter list
Advanced setting/DMZ
Advanced setting/virtual server
2. The PC with DMZ function needs a fixed IP address
Advanced setting/UPnP setting
Avanced setting/UPnP setting/UPnP port Management
Enable
Firmware update
PING testing
Remote control
Cable testing
Connection status log is displayed in the table
Status
Status/Log Display/Dos Attack log
Status/Log Display/DHCP log
Status/Log Display/system log
6.2 Additional Functions
Status/Log Display/E-mail function
Advanced Setting/ Routing/Routing Table
Advanced Setting/Backup DNS
Advanced Setting/Routing/Static Routing
Advanced Setting/ Routing/ Dynamic Routing RIP
Warrning
WLBARGSAP/RouterManualSwitching
Please make sure if the below processes are complete or not
8 FAQ
Windows XP
Use hardware
Windows Me/ 98
Use software
WLBARGS9 ManualSpecifications
WLBARGSAboutManual corega
IMPORTANT NOTE FCC Radiation Exposure Statement
Federal Communication Commission Interference Statement
memo
memo
Page
TEL +886-2-8751-9164 FAX +886-2-8751-9174
corega Taiwan Inc
7F., No. 10, Lane 345, YangGuang St. Nei-Hu
Chiu, Taipei City 114, Taiwan R.O.C