WLBARGS Manual
*Remote control
The setting allows accessing the management program via remote control.
The activation processes are as follows:
(1)Select [Enable].
(2)Indicate 1 ~ 9600 for parameters of port range. e.g. ) 8080 (Recommended keeping default values).
(3)Click on [Apply] after completing settings.
e.g. ) Assume the port value is 8080, enter IP address as the type : [http://xxx.xxx.xxx.xxx: 80] to access the management program by remote control.
*PING testing
Enger the IP address into the [Target IP Address] box, then click on [Apply]. It will display the resault the ping testing result.
*Cable testing
Click [More information] to check the status of connection speed.
42
