Allied Telesis CG-WLBARGS manual Firmware update

WLBARGS Manual

Admin login name	User name for login this management program.
	Default setting is [root].
Admin login password	Default password is empty.
Password comfirmation	Please retype password.
Connection Timeout	Enter connection time-out time.
Time setup	The default value is [Auto Setup].
Back to default setting	Click [Proceed] to restore all default values.
Reboot	New changes only effect after the system reboots.
Save Setting	Click [Save] to save your setting values as a file.
Load Setting	Click [Load] to load the files of your setting values that
	you saved earlier.
Firmware update	Please refer to *Firmware update.
Remote control	Please refer to *Remote control.
PING testing	Please refer to *PING testing.

*Firmware update

(1)Click [Browse] to open the data folder. Follow the route that the firmware saves to select the file.

(2)After selection, click [Firmware update].

(3)When the countdown starts, do not click any button. The update will complete soon afterward.

*Note: You may proceed [Check for updates] to look up the latest firmware from corega's web page.

41