Example 6: EPSR with an iMAP
Checking the Master Node Configuration
To see a summary, use the command:
show epsr
The following diagram shows the expected output.
|
| ||||
EPSR Domain | Node Type Domain Status/ | Control | Interface(s) (PhysicalState, | ||
|
| State | Vlan |
| Type, State) |
test | MASTER | EN/COMPLETE | 1000 | 5.0 | (UP,DNSTRM,FWDING ), |
|
|
|
| 5.1 | (UP,DNSTRM,BLOCKED) |
To see details, use the command:
show epsr=test
The following diagram shows the expected output.
EPSR Domain Name | test |
EPSR Domain Node Type | Master |
EPSR Domain State | COMPLETE |
MAC Address of Master Node | 00:00:CD:28:06:19 |
EPSR Domain Status | Enabled |
Control Vlan | 1000 |
Primary Interface | 5.0 |
Physical State of Primary Interface... | UP |
Primary Interface Type | DOWNSTREAM |
Primary Interface State | FORWARDING |
Secondary Interface | 5.1 |
Physical State of Secondary Interface. | UP |
Secondary Interface Type | DOWNSTREAM |
Secondary Interface State | BLOCKED |
Hello Timer (seconds | 1 |
Failover Timer (seconds) | 2 |
RingFlap Timer (seconds) | 0 |
Hello Time Remaining (seconds) | 1 |
Failover Time Remaining (seconds) | 0 |
RingFlap Time Remaining (seconds) | 0 |
Hello Sequence | 526 |
Data Vlans | 2 |