Example 6: EPSR with an iMAP
Configure the AT-TN7100 iMAP as a Transit Node
The following diagram shows a partial script for the iMAP, with the commands for configuring it as a transit node.
CREATE EPSR=test TRANSIT
#
CREATE VLAN=vlan2 VID=2 FORWARDINGMODE=STD CREATE VLAN=vlan1000 VID=1000 FORWARDINGMODE=STD
#
DISABLE
#
ADD VLAN=2
#
DELETE VLAN=1
#
SET
SET
#
ADD EPSR=test
ADD EPSR=test VLAN=1000 TYPE=CONTROL ADD EPSR=test VLAN=2 TYPE=DATA
#
ENABLE EPSR=test
#
ENABLE
Checking the Transit Node Configuration
To see a summary, use the command:
show epsr
The following diagram shows the expected output.
|
| ||||
EPSR Domain | Node Type Domain Status/ | Control | Interface(s) (PhysicalState, | ||
|
| State | Vlan |
| Type, State) |
test | TRANSIT | 1000 | 5.0 | (UP,UPSTRM,FWDING ), | |
|
|
|
| 5.1 | (UP,DNSTRM,FWDING ) |