Master Node
in a Complete
Ring
EPSR State and Settings
EPSR State and Settings
To display the EPSR state, the attached VLANs, the ring ports, and the timer values, use the command:
show epsr
The following diagram shows the output for a master node in a ring that is in a state of Complete. As well as giving the state as Complete, it also shows that port 1 is the primary port and port 2 is the secondary port. Note that the secondary port is blocked, so does not forward packets over the data VLAN (vlan2).
EPSR Information
Name | test |
|
Mode | Master | |
Status | Enabled | |
State | Complete | |
Control Vlan | vlan1000 (1000) | |
Data VLAN(s) | vlan2 (2) | |
Primary Port | 1 |
|
Primary Port Status | Forwarding | |
Secondary Port | 2 |
|
Secondary Port Status | Blocked | |
Hello Time | 1 | s |
Failover Time | 2 | s |
Ring Flap Time | 0 | s |
Trap | Enabled | |
Transit Node
in a Complete
Ring
The following diagram shows the output for a transit node in a ring that is in a state of Complete. Note that the State is
EPSR Information
Name | test |
Mode | Transit |
Status | Enabled |
State | |
Control Vlan | vlan1000 (1000) |
Data VLAN(s) | vlan2 (2) |
First Port | 1 |
First Port Status | Forwarding |
First Port Direction | Upstream |
Second Port | 2 |
Second Port Status | Forwarding |
Second Port Direction | Downstream |
Trap | Enabled |
Master Node |
Page 32 AlliedWare™ OS How To Note: EPSR
