Debugging
2.The master node continues sending Health messages
The master node continues sending Health messages, and increments the Hello Sequence number with each message. If all nodes and links in the ring are intact, these Health messages are the only debugging output you see.
.
.
.
Manager
epsrHelloTimeout: EPSR test Hello Timer expired
EPSR Port1 Tx: 00e02b00 00040000 cd280619 8100e3e8 005caaaa 0300e02b 00bb0100 00541eef 00000000 0000cd28 0619990b 00400105 03e80000 00000000 cd280619 00010002 010000f9
EPSR Port1 Tx:
TYPE | = HEALTH | STATE | = COMPLETE | ||
CTRL VLAN | = 1000 | SYSTEM | = | ||
HELLO TIME | = | 1 | FAIL TIME | = | 2 |
HELLO SEQ | = | 249 |
|
|
|
EPSR Port2 Rx: 00e02b00 00040000 cd280619 8100e3e8 005caaaa 0300e02b | |||||
00bb0100 00541eef | 00000000 | 0000cd28 | 0619990b | 00400105 | 03e80000 |
00000000 cd280619 | 00010002 | 010000f9 |
|
|
|
EPSR Port2 Rx:
TYPE | = HEALTH | STATE | = COMPLETE | ||
CTRL VLAN | = 1000 | SYSTEM | = | ||
HELLO TIME | = | 1 | FAIL TIME | = | 2 |
HELLO SEQ | = | 249 |
|
|
|
3.The primary port goes down
The link between the master node’s primary port and the neighbouring transit node goes down. Therefore, the master node detects that its primary port (port 1) has gone down.
EPSR test, Port 1 port down
Flush FDB EPSR: test vid: 2
