Example 4: EPSR with Nested VLANs
1.Configure the master node (switch A) for the EPSR domain
Configure the EPSR control VLAN:
create vlan=vlan100 vid=100
add vlan=100
Configure vlan50. This VLAN acts as both the nested VLAN and the EPSR data VLAN. The following commands create vlan50 and configure it as a nested VLAN:
create vlan=vlan50 vid=50 nested
add vlan=50 port=22 nestedtype=customer
add vlan=50
Remove the ring ports from the default VLAN:
delete vlan=1
Configure EPSR:
create epsr=example mode=master controlvlan=vlan100 primaryport=1 add epsr=example datavlan=vlan50
enable epsr=example
2.Configure the transit nodes (switches B, C and D) for the EPSR domain
Each of the transit nodes has the same EPSR configuration in this example.
Configure the EPSR control VLAN:
create vlan=vlan100 vid=100
add vlan=100
Configure vlan50, which acts as both the nested VLAN and the EPSR data VLAN:
create vlan=vlan50 vid=50 nested
add vlan=50 port=22 nestedtype=customer
add vlan=50
Remove the ring ports from the default VLAN:
delete vlan=1
Configure EPSR:
create epsr=example mode=transit controlvlan=vlan100 add epsr=example datavlan=vlan50
enable epsr=example