MACRO CONFIGURATION

To configure a CM9700 macro to activate a script in the Endura system, complete the following steps:

1.In the Endura system configure a script to complete the desired task. Note that you must use a unique logical number as the script name, which you will use in the CM9700 matrix system (refer to step 4 on page 33; refer to the WS5000 Operation manual and the Endura Resource CD for instructions on configuring an Endura script).

Figure 31. WS5000 Add Script Dialog Box

2.Use the CM9700-MGR software to add a macro (click the Macros tab, and then click New Macro). Click Edit Steps to open the Macro Editor window. Refer to the Macros section in the CM9700-MGR Software Guide for detailed instructions.

Figure 32. Adding a Macro to Activate an Endura Script

32

C1570M-E (4/07)

Page 32
Image 32
Pelco C1570M-E (4/07) manual Macro Configuration, WS5000 Add Script Dialog Box