Pelco C1570M-E (4/07) Software Conguration

C1570M-E (4/07) 25

Software Conﬁguration

Once the hardware installation and all device connections are completed, you will need to complete the following software conﬁguration tasks:

•Use the CM9700-MGR software to add the CM9700MDD-EVS and Endura cameras to the matrix system conﬁguration. Instructions are

provided in Add the CM9700MDD-EVS and Endura Cameras to the 9700 Matrix Conﬁguration on page 26. When you assign the logical

camera numbers to the Endura cameras, be sure to match the logical camera numbers assigned through the WS5000 application. Use the

CM9700 Resource CD to install the CM9700-MGR software.

•Export the CM9700-MGR conﬁguration ﬁles and transfer them to the CM9700-CC1. Refer to Export the Conﬁguration Files and Transfer the

Data to the CM9700MDD-EVS on page 38.

•Use the Endura WS5000 application to assign logical camera numbers to each camera in the Endura system that you want to view from the

matrix system. Remember that these cameras must be identiﬁed with the same logical camera numbers in the CM9700-MGR application

and the WS5000 application. Refer to the WS5000 Operation manual and the Endura Resource CD for instructions on conﬁguring cameras

in the Endura system.

•(Optional) Modify the CM9700MDD-EVS conﬁguration settings through the Endura WS5000 application. When you apply power to the unit

and connect the network cable, the Endura system manager registers the CM9700MDD-EVS as an Endura device and creates a basic

conﬁguration. To modify this basic Endura conﬁguration, refer to the WS5000 Operation manual and the Endura Resource CD for

instructions. Some settings that you may want to conﬁgure include the time format (conﬁgure the WS5000 Time Standard setting) and the

video format (NTSC or PAL; conﬁgure the WS5000 Type setting).

You can conﬁgure the matrix system to receive alarms from the Endura system for monitoring and action within the matrix system.

Endura system alarms can be any of the following types:

•Contact alarms

•Motion alarms

Endura system alarms are received by the CM9700 system as soft alarms and can be viewed on the CM9760-KBD matrix system keyboard.

Refer to Conﬁgure a CM9700 Soft Alarm to Represent an Endura Alarm on page 31 for instructions.

Macro Configuration

You can conﬁgure macros in the CM9700 matrix system to activate scripts in the Endura system. Refer to Macro Conﬁguration on page 32.

Network Video Recorder Configuration

You can conﬁgure the matrix system and the CM9700MDD-EVS for Network Video Recorder (NVR) management. Refer to Network Video

Recorder Management on page 34.