C1570M-E (4/07) 51
Specifications
MODEL
CM9700MDD-EVS Matrix digital decoder (NET5301R optimized for use with matrix) that converts digital video streams from
Endura products into analog video to be viewed and controlled on a Pelco CM9700 Series matrix switcher.
SUPPLIED ACCESSORIES
Mating Connectors 1, 16-pin
4-pin to 2-pin adapter For user-supplied power supply
SYSTEM
Processor PowerPC® 405EP
Operating System Linux®
Viewing and Control CM9760-KBD (software version 8.24 or higher)
Setup/Configuration
Endura System WS5050 or VCD5000
Matrix System CM9700-MGR (version 9.03.012 or higher)
VIDEO/AUDIO
Video Standards NTSC/PAL/EIA/CCIR composite
Video Coding MPEG-4
Video Resolutions
NTSC 4CIF 704 x 480
2CIF 704 x 240
CIF 352 x 240
PAL 4CIF 704 x 576
2CIF 704 x 288
CIF 352 x 288
Video Output 1, BNC, 75 ohms, 1 Vp-p
Video Display Stream 1
Video Display Mode Single Image
Audio Input Reserved for future use
Audio Output Speaker or line out
Audio Switch Line, speaker
SERIAL/ALARM/RELAY PORTS
Serial Pelco P (RS-422); uses 4 of 16 pins on terminal block connector
Alarm Inputs Reserved for future use
Relay Output Reserved for future use
FRONT PANEL INDICATORS/FUNCTIONS
Network RJ-45, 10/100
Power Blue
Status Green, amber, red
Network Link/Speed Amber, red
Network Activity Green
Configuration/Reset Recessed button, configuration, reboot, reset, cancel