12
VSP-230 VARIABLE SPEED WET POLISHER OPERATION
CAUTION!
Always be sure that the tool is switched off and unplugged before adjusting or checking
function on tool.
MAIN CONNECTION
Connect only to single-phase AC current supply and only to the main voltage specifi ed on
the rating plate.
SWITCHING ON AND OFF
CAUTION!
Before plugging in the tool, always check the working voltage be sure that the voltage
specifi ed is on the name plate. Before plugging in the tool, always check to see that the
slide switch actuates properly and returns to the “OFF” position when the rear of the slide
switch is depressed.
Switching on:
Switch can be locked in “ ON” position for ease
of operator comfort during extended use. Apply
caution when locking tool in “ON” position and
maintain fi rm grasp on tool. Push power switch
to the forward position until it locks into position
as shown in Figure 3.
Switching off:
Push down on power switch to release to the
rear position as shown in Figure 4.
OFF POSITION
Figure-4
Figure-3
ON POSITION