Alpha Tool.Com.HK Limited VSP-230 REAR COVER REMOVAL

Figure-24

REAR COVER REMOVAL

1. Gently pull water tube away from

holder.

2. Release the tube from the holder.

3. Unwrap 3 inches of the coiled

harness.

4. Remove the 2 screws from the valve

bracket.

Figure-25

Figure-26

Figure-27

Contents

Main TABLE OF CONTENTS VSP-230 OVERVIEW SPECIFICATIONS Page INTRODUCTION ABOUT THE SYMBOLS CAUTION! GENERAL SAFETY RULES WORK AREA ELECTRICAL SAFETY PERSONAL SAFETY SERVICE SPECIFIC SAFETY RULES USE PROPER EXTENSION CORDS GROUNDING INSTRUCTIONS ADDITIONAL PRECAUTIONS FOR USING THE VSP-230 DANGER! WARNING! LAWS AND REGULATIONS OF NOISE LEVELS VSP-230 VARIABLE SPEED WET POLISHER OPERATION CAUTION! MAIN CONNECTION SWITCHING ON AND OFF Switching on: DANGER! CAUTION! DANGER! WARNING! CAUTION! TESTING IN-LINE GFCI UNIT VARIABLE SPEED ADJUSTMENT SPEED POT FEEDBACK SENSOR WATER CONTROL VALVE SIDE HANDLE INSTALLATION Page SPLASH GUARD INSTALLATION PROFILER AND OTHER APPROVED SPINDLE ATTACHMENTS WATER-FEED ATTACHMENT MAINTENANCE DAILY PERIODIC BEARINGS AND GEARS CARBON BRUSH REPLACEMENT REAR COVER REMOVAL Page Page Page Page Page ALPHA VSP-230 PARTS LIST ALPHA VSP-230 PARTS LIST SERVICES AND WARRANTY INFORMATION LOANER PROGRAM NEED MORE INFORMA TION ALPHA VSP-230 PARTS LIST Suite #5 EC DECLARATION OF CONFORMITY APPENDIX A FREQUENTLY ASKED QUESTIONS HELPFUL HINTS PRODUCT REGISTRATION CARD