17
CUSTOMIZING THE SPLASH
GUARD
The splash guard can be cut to different
heights according to the application to be
performed.
Cutting: Using a pair of scissors or other
cutting instrument,
choose the desired
height according to
the application to be
performed and cut
along the grooved
cut lines, as shown in
Figure 15.
RECOMMENDED HEIGHTS:
Profiling: When using Alpha® Profilers the
splash guard can be used at its full height.
Polishing: When polishing, you may cut the
splash guard at one of the grooved lines for easier
access to the workpiece.
Full height
Figure-15
Figure-16
Figure-17
Splash Guard cut to
accomodate polishing
application
Grooved Cut Lines