SETUP Operation
BAND MODE
g DN | f UP | SETUP | Rotary encoder |
Switching the Tuner Mode
The
1
2 Press the f UP or g DN button to select "TUNER" mode.
3 Press the BAND button to switch the TUNER mode.
→NORMAL →
NORMAL : Standard setting
STABLE : Noiseless priority setting
NOTES
•The initial setting at the factory is "NORMAL."
•If you find the sound is very noisy while listening to the tuner in the
4 When the setting is completed, press the SETUP
button to return to the normal mode.
NOTE
"MP3 File Selection" and "Playing MP3 data" in the "SETUP" mode section are described in MP3 Operation on page 28.
Changing Lighting Color
(CDA-7998 only)
1 Press and hold the SETUP button for at least 3 seconds.
2 Press the f UP or g DN button to select “AMBER”.
3 Press the BAND button to toggle the mode between AMBER ON (amber) and AMBER OFF (green).
4 Press the SETUP button to set the selected mode.
NOTE
The initial setting at the factory is "AMBER OFF."
Dimmer Control (CDA-7897 only)
Set the DIMMER control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit's backlighting is too bright at night.
1
2 Press the f UP or g DN button to select the DIM (DIMMER) mode.
3 Press the BAND button to select the Dimmer mode. Each press toggles between DIM AUTO and DIM MANUAL.
4 Press the SETUP button to activate the normal mode.
NOTE
The initial setting at the factory is "DIM AUTO."
Subwoofer On and Off
1 Press and hold the SETUP button for at least 3 seconds.
2 Press the f UP or g DN button to select the Subwoofer mode.
3 Press the BAND button to toggle mode between ON and OFF.
NOTE
The initial setting at the factory is subwoofer ON.
4 Press the SETUP button after setting the Subwoofer ON.
5 Press the MODE button repeatedly to select the Subwoofer mode.
→ Subwoofer→ BALANCE
VOLUME ← DEFEAT ← FADER ←
Press the g DN or f UP button after selecting the Subwoofer mode, and the subwoofer output phase is toggled “NORMAL (PHASE 0°)” or “REVERS (PHASE 180°)”.
6 Turn Rotary encoder until the desired sound is obtained in each mode.