Alpine CDA-7998 Setting the Subwoofer Output, Sound Beep Guide Function, Turning Mute Mode On/Off

Models: CDA-7998

1 52
Download 52 pages 13.9 Kb
Page 20
Image 20
Setting the Subwoofer Output
Press the f UP or g DN button to select “BEEP.”
Press and hold the SETUP button for at least 3 seconds.
Press the f UP or g DN button to select the SCROLL mode.
Press and hold the SETUP button for at least 3 seconds.

SETUP Operation

SOURCE BAND

g DN f UP SETUP

Setting the Subwoofer Output

You can set the subwoofer output to stereo or monaural. Make sure to set the correct output for your subwoofer type.

1 Press and hold the SETUP button for at least 3 seconds.

2 Press the g DN or the f UP button to select “Subwoofer STEREO.”

3 Press the BAND button to toggle the mode between STEREO and MONO.

STEREO

: Subwoofer stereo (L/R) output.

MONO

: Subwoofer monaural output.

NOTE

The initial setting at the factory is Subwoofer STEREO.

4 Press the SETUP button to return to normal mode.

Sound (Beep) Guide Function

This function will give audible feedback with varying tones depending upon the button pressed.

1 Press and hold the SETUP button for at least 3 seconds.

2

3 Press the BAND button to toggle the mode between ON and OFF.

NOTE

The initial setting at the factory is BEEP ON.

4 Press the SETUP button to set the selected mode.

Turning Mute Mode On/Off

If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. This function can be turned ON or OFF from the head unit by following procedure below.

1

2 Press the f UP or g DN button to select the MUTE mode.

3 Press the BAND button to turn on or off the MUTE mode.

Each press toggles between the MUTE ON and OFF modes.

NOTE

The initial setting at the factory is “MUTE ON.”

4 Press the SETUP button again to return to normal operation.

Scroll Setting

This CD player can scroll the disc and track names recorded on CD-TEXT discs, as well as the text information of MP3 files, folder names, and ID3 tags.

1

2

3 Press the BAND button to toggle the mode between AUTO and MANU (MANUAL).

AUTO : the CD text information, the text information of folder and file names, and the ID3 tags are scrolled automatically.

MANU (MANUAL): the display is scrolled only when a disc is loaded or when a track is changed, etc.

4 When the setting is completed, press the SETUP button to return to the normal mode.

NOTES

Initial mode is “MANU (MANUAL).”

The unit scrolls CD text names, folder names, file names or ID3 tag display. The disc titles input manually (refer to page 15) cannot be scrolled.

18-EN

Page 20
Image 20
Alpine CDA-7998 Setting the Subwoofer Output, Sound Beep Guide Function, Turning Mute Mode On/Off, Scroll Setting, 18-EN