Alpine CDA-7998 Setting the AUX Mode V-Link, Connecting to an External Amplifier, CDA-7897only

Press and hold the SETUP button for at least 3 seconds.

Setting the AUX Mode (V-Link)

Front

Amplifier

left

You can input TV/video sound by connecting an optional Ai-NET/RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to this component.

1 Press and hold the SETUP button for at least 3 seconds.

2 Press the f UP or g DN button to select the AUX mode.

3 Press the BAND button to toggle the mode between ON and OFF.

NOTES

•The initial setting at the factory is OFF.

•You can set the AUX mode display by pressing the

g DN or f UP button after ON is set, select the AUX mode display setting, and then press the BAND button.

•When connecting the KCA-410C, you can set two AUX mode displays.

4 Press the SETUP button to return to normal mode.

5 To adjust the volume, etc., first press the SOURCE button and select the AUX mode, then make the necessary adjustment.

NOTE

When using the Versatile Link Terminal (KCA-410C), you can connect two external inputs. To select the mode, press the BAND button on the unit.

Connecting to an External Amplifier

(CDA-7897 only)

When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier. The power output is set to OFF by the following procedure.

1 Press and hold the SETUP button for at least 3 seconds.

2 Press the f UP or g DN button to select "P-IC".

3 Press the BAND button to toggle the mode between P- IC ON and P-IC OFF.

P-IC OFF:

In this mode, use the front and rear pre-amplifier of the unit, connected to an external amplifier to drive speakers. In this setting, nothing is output from the unit’s internal amplifier.

Front

right

Rear

Amplifier left

Rear right

P-IC ON:

The speakers are driven by the built-in amplifier.

Speakers

SPEAKER

RIGHT FRONTFront right

SPEAKER

RIGHT REARRear right

SPEAKER

LEFT REARRear left

SPEAKER

LEFT FRONTFront left

NOTE

No sound is produced by the system when the power output is set to OFF.

4 Press the SETUP button to return to normal mode.

Setting the Defeat Mode External Interrupt

When interrupting external devices to this unit, turning DEFEAT ON will bypass BASS, TREBLE and MX for the external interrupt.

1

2 Press the f UP or g DN button to select the INTERRUPT mode.

3 Press the BAND button to toggle the mode between ON and OFF.

When using Initial mode, set this to OFF.

When the Initial mode is not selected, set this to OFF.

4 Press the SETUP button to return to normal mode.

19-EN