SETUP Operation
BAND
g DN f UP SETUP | Rotary encoder |
Demonstration
This unit has a Demonstration feature which simulates the display functions.
1 Press and hold the SETUP button for at least 3 seconds.
2
3 Press the BAND button to turn on or off the DEMO mode.
Each press toggles between ON and OFF.
If no button is pressed for 30 seconds, the DEMO mode activates.
NOTES
•The initial setting at the factory is “OFF.”
•To quit DEMO mode, set to “OFF.”
4 Press the SETUP button again to return to normal
operation.
Adjusting Display Contrast (CDA-7897 only)
You can adjust the display contrast for better visibility.
1 Press and hold the SETUP button for at least 3 seconds.
2 Press the f UP or g DN button to select “CONTRAST.”
3 Turn the Rotary encoder to adjust the contrast of the display.
You can adjust in a range of
4 Press the SETUP button to return to normal mode.
Opening Message ON/OFF Setting (CDA-7998 only)
You can select whether the opening display is shown or not when power is turned ON. Choose between the standard display pattern and the downloaded Profile data display pattern.
This function is only available if you have already downloaded the profile data.
1 Press and hold the SETUP button for at least 3 seconds.
2 Press the g DN or f UP button to select the OPENING MESSAGE mode.
3 Press the BAND button to toggle the mode between OFF and ON.
OFF mode : This shows the standard display pattern.
ON mode : This shows the downloaded Profile data and the calendar message after data downloading.
NOTES
•When selecting a mode with the BAND button, the display pattern is immediately shown. When OFF mode is selected, nothing is shown.
•The initial setting at the factory is OFF mode.
4 Press the SETUP button to return to normal mode.