Alpine CDA-7998 owner manual Multi-ChangerSelection, 27-EN

Multi-Changer Selection

Alpine's Ai-NET system will support up to 6 CD Changers. When operating two or more changers, the KCA-400C (Multi-Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Changers. If you use 2 Switching devices, you can connect up to 6 CD Changers. When using KCA- 410C (Versatile Link Terminal), you can connect two changers and two external outputs (AUX).

1 Press the SOURCE button on the CDA-7998/CDA- 7897 to activate the CD Changer mode.

Alternatively, press the SOURCE button on the Remote Control (RUE-4187) to activate the CD Changer mode.

3 The CD Changer Selection mode remains active for 8 seconds after step 2 is performed. Press the BAND button until the desired CD Changer indicator appears on the display.

NOTE

If the selected CD Changer is not connected, the display will show “NO CHANGER .”

Alternatively press the BAND button on the Remote Control until the desired changer indicator appears on the display.

4 To operate the selected changer, see “CD Player Operation” section.

NOTE

For further details about the external input (AUX) when using KCA-410C, see ”Setting the AUX Mode (V-Link)" on page 19.

SOURCE

BAND

2 Press the BAND button on the CDA-7998/CDA-7897 or the RUE-4187 to activate the CD Changer Selection mode.

27-EN