Alpine CDA-7998 owner manual Installation, 45-EN, Caution CDA-7897only, Removal, Japanese Car

Models: CDA-7998

1 52
Download 52 pages 13.9 Kb
Page 47
Image 47
Installation

Installation

Caution (CDA-7897 only)

Do not block the unit’s fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire.

 

Air ventilation

 

hole

1

<Rear side>

Mounting Sleeve

 

 

(Included)

Dashboard

CDA-7998/CDA-7897

Slide mounting sleeve from main unit (see "Removal" on this page).

Slide the mounting sleeve into the dashboard.

No Pressure Here

Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the CDA-7998/CDA-7897. Connect all other leads of the CDA-7998/CDA-7897 according to details described in the CONNECTlONS section.

3

Lock Pin

Slide the CDA-7998/CDA-7897 into the dashboard. When the unit is in place, make sure the locking pins are fully seated in the down position. This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver. This ensures that the unit is properly locked and will not accidentally come out from the dashboard.

Removal

1Use a small screwdriver (or similar tool) to push the locking pins to the "up" position (see above drawing). As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock before unlocking the second pin.

2Pull the unit out, keeping it unlocked as you do so.

< JAPANESE CAR >

No Pressure Here

2

Screw

 

Hex Nut (M5)

 

 

∗∗

 

Bolt Stud

Metal

 

Mounting

 

Strap

 

CDA-7998/

Ground Lead

CDA-7897

 

Chassis

Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw () already attached to the vehicle's chassis.

NOTE

For the screw marked **, use an appropriate screw for the chosen mounting location.

Face Plate

Screws (M5 8)

CDA-7998/ (Included)

CDA-7897

Ground Lead

Caution (CDA-7897 only)

Mounting Bracket

NOTE

Secure the ground lead of the unit to a clean metal spot using a screw () already attached to the vehicle's chassis.

45-EN

Page 47
Image 47
Alpine CDA-7998 owner manual Installation, 45-EN, Caution CDA-7897only, Removal, Japanese Car