Alpine CDA-7998 MobileHub Link OperationOption, Telephone Mode ON/OFF, About MobileHub Link

MobileHub™ Link Operation(Option)

Telephone Mode ON/OFF

PHONE BOOK MENU

About MobileHub™ Link

Connect a separately sold Junction Box and a portable telephone (available from Nokia) to control the incoming and outgoing calls of the portable telephone.

Functions that can be operated from CDA-7998/CDA-7897

Incoming Calls	Outgoing Calls	Short Messages
AUTO call	Dial Outgoing	Receiving History
		Selection
Manual call	Receive Outgoing	Sending History
		Selection
	Miss call Outgoing	Short Message
		Indication
	Phone Book	Mail Arrival
	Outgoing (in	Announcement
	alphabetical order)	(Information icon)
	Phone Book	Mail Sending in
	Outgoing (Search)	Standardized
		Sentence
	Speed Dial
	Outgoing
	Direct Dial Outgoing

CAUTION

•Even with hands-free operation, a driver can be distracted during telephone operation or receiving a call. For the sake of safety, drivers are requested to refrain from operating the telephone while driving.

•For the sake of safety, operations other than incoming calls and Speed-Dial outgoing calls cannot be used.

NOTES

•If a portable telephone is connected, its address book, incoming and outgoing history, short message history and standardized sentences are downloaded to the Junction Box.

•Please refer to the instruction manual of the Junction BOX.

1 Press the button, PHONE BOOK button, or

MENU button.

See relevant pages for each item.

NOTES

•When a portable telephone is not connected, “NO PHONE” is displayed for at least 2 seconds, then the mode returns to the original source mode.

•When the portable telephone is taken off the Junction BOX during an incoming or outgoing call, or during a hands-free call, the call will be treated as an ordinary one by the portable telephone.

•When there is an incoming call while the power of CDA-7998/ CDA-7897 is OFF, the power of CDA-7998/CDA-7897 will turn ON automatically for an ordinary call by the portable telephone, but not for a hands-free call.

•Even if the power of the portable telephone is OFF, when CDA-7998/CDA-7897 is set to the telephone mode, the power of the portable telephone will be turned ON.

•Even if the ACC power of the vehicle is turned OFF (even if the engine is stopped) during a hands-free call, the call is not disconnected, and an ordinary call by the portable telephone is possible.

•If there is an incoming call during operation (except an outgoing call or talking), operation mode will end and switch to the incoming or talking mode.

•An outgoing call from a portable telephone is also possible. However, you cannot perform different operations at the same time from a portable telephone and CDA-7998/CDA-7897 as malfunction can result.

•With a Junction BOX connected outgoing, incoming, and sending history will also be recorded in the portable telephone.

•While telephoning, the setting of CDA-7998/CDA-7897 automatically turns to DEFEAT ON.

Incoming Calls

1 Press the button to receive an incoming call.

2 Press the button to finish a call.

The telephone mode will end and return to the original source mode.

NOTES

•When the Automatic Calling mode is on, you can talk after 3 seconds of receiving the incoming call.

•Press the button to toggle the mode between Automatic Calling and Manual Calling.

The initial setting at the factory is Automatic Calling mode.

•Press the button during an incoming call to disconnect it.

35-EN