System Example

Precautions when Making System Upgrades

After connections are completed, it will be necessary to change the system settings of the DVA-5210. Before installing the product, please see “Setting the System Switch” on page 32 and “Setting the Ai-NET” on page 21.

When connecting the DVA-5210 to a head unit or Ai-NET compatible AV head unit, do not connect the switched (ignition) power lead.

When connecting the DVA-5210 to an Alpine TV monitor and Ai-NET compatible AV head unit together, the remote control input cable (white/brown) of both units must be connected. Failing to do so will result in a loss of remote control operation. When making connections to another brand of TV monitor, please use the optional remote control sensor unit.

Connecting a non Ai-NET compatible Head Unit, Digital Audio Processor (PXA-H700, PXA-H900, etc.)

and TV Monitor

DVD Player

DVA-5210

System Switch

1

2

 

 

 

 

 

 

 

 

 

 

 

Digital Input

 

Digital Output

 

 

 

 

 

 

Terminal (Optical)

 

 

 

 

 

 

 

(for DVD Player)

 

Terminal (Optical)

 

 

 

 

 

 

 

Fiber Optic Cable

 

 

 

 

 

 

 

 

Digital Audio Processor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RCA Extension Cable

 

 

 

 

 

 

 

 

 

 

 

 

PXA-H700, etc.

 

 

 

Head Unit non -compatible

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Sold Separately)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ai-NET (Sold Separately)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Video Output Connector

Audio Output Connector

Remote Turn-On Lead (Blue/White)

Remote Turn-On Lead (Blue/White)

RCA Extension Cable

AV-Interface Unit

Monitor

 

AUX Video Input

TME-M790, etc.

TME-M790, etc.

Terminal (AUX1)

(Sold Separately)

(Sold Separately)

Only when connecting with rear monitor

 

 

 

AUX Audio Input

 

 

Terminal (AUX1)

 

RCA Extension Cable

 

 

Remote Control Input Lead

Remote Control Output Lead (AUX1)

(White/Brown)

(White/Brown)

Setting of DVA-5210

The DVA-5210's system settings must be made after connections are completed. Before fixing the unit in place, refer to “Setting the System Switch” on page 32 and “Setting the Ai- NET” on page 21.

Setting Item

Setting

 

 

System switch

2 (STANDALONE)

Ai-NET setting

-

If using in a system with a head unit that is not fully Ai-NET compatible (no processor control) and a digital audio processor, do not connect the head unit’s Ai-NET cable. Only connect the DVA-5210 and digital audio processor using an optical fiber cable and its own Ai-NET cable. Use the head unit’s analog output (Front or rear) connected to the analog input of the processor.

When connecting only to a digital audio processor (with a non-Alpine head unit or Alpine head unit without Ai-NET), it is possible to use both an optical fiber cable and an Ai-NET output cable.

When connecting another brand of TV monitor, there is no need to connect the remote control input cord (white/brown). Use the optional remote control sensor unit.

Be sure to connect the switched (ignition) power lead.

Also refer to the operating instructions of the other products in the system.

Please observe the following when using Fiber Optic Cable.

Do not coil the Fiber Optic Cable smaller than a 30 mm radius.

Do not place anything on top of the Fiber Optic Cable.

33-EN

Page 34
Image 34
Alpine DVA-5210 owner manual System Example, 33-EN, Precautions when Making System Upgrades, Setting Item