Alpine DVA-5210 owner manual Connecting an Ai-NET compatible Head Unit and TV Monitor, 35-EN

Connecting an Ai-NET compatible Head Unit and TV Monitor

Monitor

TME-M790, etc. (Sold Separately)

AV-Interface Unit

TME-M790, etc.

(Sold Separately)

System Switch

When an Ai-NET digital audio processor is not used, place this switch in the NORM position.

NORM

RCA Extension Cable

Terminal (AUX1)

AUX Audio Input

AUX Video Input					Head Unit
Terminal (AUX1)					with Ai-NET
		Remote Control			(Sold Separately)
		Output Lead (AUX1)
		(White/Brown)			Ai-NET Cable
	Remote Control
	Input Lead
	(White/Brown)		Ai-NET Connector
			(Black)
	Video Output
	Connector			Ai-NET Connector
		DVD Player
				(Gray)
		DVA-5210

Ai-NET Output Connector

Ai-NET Cable

RCA Extension

CableAudio Output

Connector

CD Changer

(Sold Separately)

Only when connecting with rear monitor

System Switch

1

2

Setting of DVA-5210

The DVA-5210's system settings must be made after connections are completed. Before fixing the unit in place, refer to “Setting the System Switch” on page 32 and “Setting the Ai-NET” on page 21.

	Setting
	AV Head unit available after December	AV Head unit available before January
Setting Item	2003 (IVA-D300R, etc.)	2004 (IVA-D900R, etc.) or Head unit.
System switch	1 (Ai-	NET)
Ai-NET setting	FULL	TIME

•Be sure to switch the head unit’s system switch before turning the power on.

•Also refer to the operating instructions of the other products in the system.

•To connect a rear monitor, connect to the front monitor’s RCA output (TV Tuner Box).

The switched (ignition) power lead connection is not needed.

35-EN